Upper Air Duct Pipe, Removing And Installing, Engine Code DWRB: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the reinforcement brace. Refer to OVERVIEW - LOCK CARRIER .
Left Upper Air Duct Pipe:
-- Remove the bolt -2- and remove the lines from the EVAP system and push slightly to the side.
-- Remove the bolts -arrows-.
-- Loosen the hose clamp -1-, remove the air duct hose and remove the air duct pipe -3-.
Right Upper Air Duct Pipe:
-- Free up the vacuum line -2-.
-- Remove the bolt -3- and remove the lines from the EVAP system and push slightly to the side.
-- Remove the bolts -arrows-.
-- Loosen the hose clamp -4-, remove the air duct hose and remove the air duct pipe -1-.