Overview - VALVETRAIN
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.
- Intake Valve
- Do not rework, only grinding is permitted
- Mark the installed position for reinstallation.
- Valve Dimensions. Refer to VALVE DIMENSIONS .
- Valve Guides, Checking. Refer to VALVE GUIDES, CHECKING .
- Lower Valve Spring Retainer
- Valve Stem Seal
- There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
- Replacing. Refer to VALVE STEM SEALS, REMOVING AND INSTALLING .
- Valve Spring
- Installation position:
- Removing and Installing. Refer to VALVE SPRING, REMOVING AND INSTALLING .
- Upper Valve Spring Retainer
- Valve Keepers
- Roller Rocker Lever
- Mark the installation position with paint for reinstallation
- Check the roller bearing for ease of movement
- Oil the running surfaces before installing
- Clipped in with the clamp OVERVIEW - VALVETRAIN on the hydraulic lifter OVERVIEW - VALVETRAIN
- Clip
- Not available separately.
- Check for secure fit
- Hydraulic Lifter
- Clipped in the roller rocker lever OVERVIEW - VALVETRAIN
- Mark the installation position with paint for reinstallation
- Oil the running surfaces before installing
- Cylinder Head
- Shown for cylinder bank 2 (left)
- Valve Guides, Checking. Refer to VALVE GUIDES, CHECKING .
- Exhaust Valve
- Do not rework, only grinding is permitted
- Mark the installed position for reinstallation.
- Valve Dimensions. Refer to VALVE DIMENSIONS .
- Valve Guides, Checking. Refer to VALVE GUIDES, CHECKING .
Installation position of the intake valve spring
- The tight spring coils -arrow- face toward the cylinder head.
Installation position of the exhaust valve spring
- The color marking -arrows- points upward.