Oil Pan Lower Section, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.
- Engine oil drained. Refer to ENGINE OIL .
Depending on the model, preliminary work may be required. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
-- Disconnect the connector -arrow- from the Oil Level Thermal Sensor -G266-.
-- Free up the wires.
-- Place a cloth underneath to catch any escaping engine oil.
-- Loosen and remove the bolts in the following sequence: -18 to 1-.
-- Loosen and remove the oil pan lower section carefully from the bonding.