Overview - Engine Oil Cooler
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.
- Cylinder Block
- Seal
- Replace after removing
- Bolt
- Tightening Specifications and Sequence. Refer to Fig 2.
- Engine Oil Cooler
- Removing and Installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Oil cooler tightening specifications and sequence
-- Tighten the bolts -1 to 8- as shown in steps.
| Step | Tightening Specification |
|---|---|
| 1. | Install all the way by hand |
| 2. | 5 Nm |
| 3. | 9 Nm |