Oil Separator, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to OIL SEPARATOR, REMOVING AND INSTALLING .
Cylinder Bank 1 (Right):
-- Remove the crankcase ventilation hoses -1 and 3- by pressing the release buttons on both sides.
-- If necessary, free up the wiring harness or coolant line.
-- Remove the bolts -arrows- and the oil separator -2-.
Audi RS6 / RS7 / A8 / RSQ8 / SQ8 / SQ7, Cylinder Bank 2 (left):
-- Remove the crankcase ventilation hoses -2- by pressing the release buttons on both sides.
-- Remove the bolts -arrows- and the oil separator -1-.
Audi S8, cylinder bank 2 (left):
-- Remove the crankcase ventilation hoses -1 and 3- by pressing the release buttons on both sides.
-- Remove the bolts -arrows- and the oil separator -2-.