LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium Plus, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 486 (Turbocharger, Supercharger - (Servicing - 8-Cylinder 4.0L 4V TFSI Engine Ea825)) >> 21 Turbocharger, Supercharger >> Turbocharger >> Coolant Lines On Turbocharger, Removing And Installing >> Upper Coolant Lines On Turbocharger, Removing And Installing >> Installing

Upper Coolant Lines On Turbocharger, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2023 Audi SQ8, 2023 Audi RS Q8, 2022 Audi SQ8, 2022 Audi RS Q8, and 2021 Audi SQ8. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the particulate filter. Refer to PARTICULATE FILTER, REMOVING AND INSTALLING .

-- Install the front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

-- Install the heated oxygen sensors. Refer to HEATED OXYGEN SENSOR, REMOVING AND INSTALLING .

-- Install the heat shield and the engine cover. Refer to ENGINE COVER .

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .