Camshaft, Measuring Axial Clearance

Special tools and workshop equipment required 

• Dial Indicator Holder:VW387 
  Fig 1: Dial Gauge Holder

  Courtesy of AUDI
• Dial Indicator - 0-10mm:VAS6079 
  Fig 2: Dial Gauge

  Courtesy of AUDI

Procedure

Fig 3: Identifying Dial Gauge Holder VW 387 And Dial Gauge - 0-10 mm VAS 6079

Courtesy of AUDI

• The camshaft housing is removed. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .

-- Remove the Camshaft Positioning Tool:T40331/1  .

-- Secure the Dial Indicator - 0-10mm:VAS6079  with the Dial Indicator Holder:VW387  on the camshaft housing.

-- Press the camshaft against the dial gauge by hand.

-- Set the dial gauge to "0".

-- Press camshaft off the dial gauge and read the value:

Axial clearance

• Intake camshaft: 0.014 to 0.064 mm.
• Exhaust camshaft: 0.048 to 0.155 mm.