Cylinder Bank 2 (Left) Camshaft Housing, Removing And Installing: Notes

WARNING: This page is about a different car, the 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Sliding Hammer :T10133/3 from the Injector/Combustion Chamber Seal Tool Set:T10133C

Fig 1: Identifying Injector/Combustion Chamber Seal Tool Set
Courtesy of AUDI
Camshaft Adjustment Pins:T40060 (with the engine installed)

Fig 2: Camshaft Adjustment Pins T40060
Courtesy of AUDI
Locating Pins:T40116

Fig 3: Identifying Locating Pins T40116
Courtesy of AUDI
Hand drill with plastic brush insert
Protective Eyewear
Sealant. Refer to the appropriate Electronic Parts Information.
M8x25 Bolts (quantity 2)