Safety Precautions And Test Procedures, All-Wheel Drive Clutch 0CJ Or 0CX

WARNING: This page is about a different car, the 2023 Audi SQ8, 2023 Audi RS Q8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

All-Wheel Drive Clutch

Courtesy of AUDI

The all-wheel drive clutch has its own fluid system.
Check the ATF level and fill (if necessary) when replacing or after repairing the all-wheel drive clutch. Refer to OIL LEVEL, CHECKING .
Capacities (Refer to ALL-WHEEL DRIVE CLUTCH CAPACITY, 0CX AND 0DJ ) and specifications. Refer to the appropriate Electronic Parts Information.
Clutch Torque, Checking. Refer to ALL-WHEEL DRIVE CLUTCH TORQUE, CHECKING .

ATF for All-Wheel Drive Clutch, Replacing

If the ATF is being replaced, the >>oil age adaptation values<< under Guided Functions in the 22 - AWD electronics folder and the function 22 - Perform ATF change for all-wheel drive clutch must be reset to a new ATF. Refer to ALL-WHEEL DRIVE CLUTCH OIL, DRAINING AND FILLING .

All-Wheel Drive Clutch, Replacing

All-Wheel Drive Clutch, Removing and Installing. Refer to ALL-WHEEL DRIVE CLUTCH, REMOVING AND INSTALLING .
If the all-wheel drive clutch is being replaced, it must be activated under Guided Functions in the 22 - AWD electronics folder with the function 22 - Replace control module . Refer to ADDITIONAL WORK WHEN REPLACING ALL-WHEEL DRIVE CLUTCH .

All-Wheel Drive Control Module -J492-, Replacing

All-Wheel Drive Control Module, Removing and Installing. Refer to CONTROL MODULE, REMOVING AND INSTALLING .
If the All-Wheel Drive Control Module -J492- is being replaced, additional work is required (reading out the adaptation values of the old control module). Refer to ADDITIONAL WORK FOR VEHICLES WITH "quattro ultra" .