Turbocharger, Removing And Installing, Cylinder Bank 2 (Left): Removing
WARNING: This page is about a different car, the 2024 Audi SQ7 and 2023 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Remove the reinforcement brace. Refer to OVERVIEW - LOCK CARRIER .
-- Loosen the hose clamps -1 and 2- and remove the air duct hose.
-- Remove the connector -1- for the Oxygen Sensor 2 Before Catalytic Converter -GX11- from the bracket, disconnect it and free up the wire.
All additional procedures are described under: TURBOCHARGER, REMOVING AND INSTALLING .