LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium Plus, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 343 (Crankshaft, Cylinder Block (Servicing - 6-Cylinder 2.9L; 3.0L 4V TFSI Ea839 Engine)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Sensor Wheel, Removing And Installing >> Installing

Sensor Wheel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

-- Install the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .

-- If the transmission is replaced, perform the corresponding adaptations in the Guided Functions "01 - Engine electronics, functions" or "0001 - Steps after replacing component" using the Vehicle Diagnostic Tester.

scientia non olet · About LEMON Manuals