Cylinder Bank 2 (Left) Camshaft Housing, Removing And Installing: Notes

WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Sliding Hammer :T10133/3 from the Injector/Combustion Chamber Seal Tool Set:T10133C

Fig 1: Identifying Injector/Combustion Chamber Seal Tool Set
Courtesy of AUDI
Camshaft Adjustment Pins:T40060 (with the engine installed)

Fig 2: Camshaft Adjustment Pins T40060
Courtesy of AUDI
Locating Pins:T40116

Fig 3: Identifying Locating Pins T40116
Courtesy of AUDI
Hand drill with plastic brush insert
Protective Eyewear
Sealant. Refer to the appropriate Electronic Parts Information.
M8x25 Bolts (quantity 2)