Chain TENSIONER, Removing And Installing: Installing
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Replace the seal after removal.
-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVERS, REMOVING AND INSTALLING .
-- If changes on the timing chain make place or components should be replaced, perform the corresponding adaptations in the Guided Functions "0001 - Engine electronics, functions". Use the Vehicle Diagnostic Tester.