Ribbed Belt, Removing And Installing

WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Removing

-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the left and right bolt -1- and push the coolant pipe on the lock carrier toward the rear.

Fig 1: Coolant Pipes on Lock Carrier

Courtesy of AUDI

Additional procedures. Refer to RIBBED BELT, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - COOLANT PIPES
Refer to OVERVIEW - NOISE INSULATION .