Sliding Bar Ball, Installing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Camshaft Spacer:T40191

Fig 1: Camshaft Spacer T40191
Courtesy of AUDI

Installing

Fig 2: Inserting Spring And Ball Into Camshaft

Courtesy of AUDI

CAUTION:

Risk of injuring the eyes due to the sliding bar ball springing out.

- Wear protective eyewear.

-- Insert the spring -1- in the camshaft.

-- Place the ball -2- on the spring in the camshaft.

-- Push the ball and spring downward in the direction of -arrow A- using the Camshaft Spacer:T40191/1 and hold in place.

-- Push the sliding bar -3- in the direction of -arrow B-.