Cam Adjustment Actuator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bring the Cam Adjustment Actuators into the Installed Position

Courtesy of AUDI

Install in the reverse order of removal while noting the following:

Check the O-rings for damage
The cam adjustment actuator pin must be brought into the installation position.

-- Press down the cam adjustment actuator pin -arrow- by hand.

The adjusting element pin must not be in the outward position.

-- Coat the O-rings with engine oil.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

Tightening Specifications

Refer to OVERVIEW - VALVETRAIN