Overview - Charge Air System
WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Charge Air Cooler
- Removing and Installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- If there are small impressions on the fins. Refer to RADIATOR AND CONDENSER ASSEMBLY .
- Air Duct Hose
- Must be free of oil and grease before installing
- From the Turbocharger
- Bolt
- 7 Nm
- For Charge Air Pressure Sensor -G31- with threaded connection:
- Thread cutting
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- Charge Air Pressure Sensor -G31-
- Removing and Installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
- O-Ring
- Not available separately; replace if leaking -item 5- OVERVIEW - CHARGE AIR SYSTEM or damaged
- To Intake Manifold
- Seal
- Replace if damaged
- Air Duct Pipe
- There are different versions. Refer to the appropriate Electronic Parts Information for the allocation.
- Must be free of oil and grease before installing
- Seal
- Replace if damaged