LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium Plus, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 253 (Turbocharger, Supercharger (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4 BZ))) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Removing

Charge Air Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to OVERVIEW - BUMPER COVER .

-- Release the catches -arrow- and remove the air ducts -1 and 3-.

GWWA21-11081Courtesy of AUDI

-- Loosen the left and right hose clamp -1- and remove the air duct pipe from the charge air cooler.

GWWA21-11082Courtesy of AUDI
CAUTION:

Risk of damaging the retainers due to improper handling.

- Carefully release the retainers.

-- Release the retainers in direction of -arrows- on the left and right sides and disengage the charge air cooler from the radiator.

-- Remove the charge air cooler downward.