Coolant Recirculation Pump -V50-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- If necessary, remove the bolts -arrows- for the bracket -1-.
-- Disconnect the connector -1-.
-- Place a cloth underneath to catch leaking coolant.
-- Loosen the hose clamps -2-, then clamp off the coolant hoses with the Hose Clamps - Up To 25mm:3094 and remove them.
-- Remove the bolts -arrow- and the Coolant Recirculation Pump -V50-.