Right Coolant Pipe, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

• Replace the O-ring after removal.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the appropriate Electronic Parts Information.
• Used coolant cannot be used again.

-- Install the turbocharger. Refer to TURBOCHARGER, REMOVING AND INSTALLING .

-- Install the catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Connections and wire routing. Refer to the appropriate Wiring Diagram.

-- Fill with coolant. Refer to COOLANT, FILLING USING Cooling System Charge Kit:VAS6096 [DMSA, DMSB] .