LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium Plus, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Lubrication (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4 BZ))) >> 17 Lubrication >> Engine Oil Cooler >> Engine Oil Cooler, Removing And Installing >> Removing

Engine Oil Cooler, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the sub-assembly bracket. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .

-- Remove the bolts -4 and 5- and the engine oil cooler -3- with the seal -2- from the sub-assembly bracket -1-.

Fig 1: Identifying Oil Cooler, Bolts And Seal
GWWA17-10228Courtesy of AUDI
scientia non olet · About LEMON Manuals