LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium Plus, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 250 (Exhaust System, Emission Controls (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4 BZ))) >> 26 Exhaust System, Emission Controls >> Exhaust Temperature Regulation >> Exhaust Temperature Regulation Components, Removing And Installing >> Removing

Exhaust Temperature Regulation Components, Removing And Installing: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -arrow- and free up the wires.

GWWA26-12312Courtesy of AUDI

-- Remove the Exhaust Gas Temperature Sensor 3 -G495- -2- and Exhaust Gas Temperature Sensor 4 -G648- -1- :

scientia non olet · About LEMON Manuals