Left Engine Support, Removing And Installing: Installing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace bolts that were tightened with an additional turn after removing them.

-- Connect the coolant hose to the connector coupling. Refer to Fig 1.

Fig 1: Connect the Coolant Hose to the Connector Coupling

Courtesy of AUDI

-- Install the engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Install the support bearing. Refer to ENGINE SUPPORT BEARING, REMOVING AND INSTALLING .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .