LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium Plus, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4 BZ)) (DMSA)) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft Dimensions

Crankshaft Dimensions

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
Reconditioning Dimension (1) Crankshaft Bearing Pin Diameter in mm Connecting Rod Bearing Pin Diameter in mm
Standard dimension 48.00 -0.032 -0.052 47.80 -0.022 -0.042
(1) The preparation of worn crankshafts is not possible at this time.
scientia non olet · About LEMON Manuals