LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S5 Premium Plus, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4 BZ)) (DMSA)) >> 13 Crankshaft, Cylinder Block >> Balance Shaft >> Balance Shaft, Removing And Installing >> Balance Shaft, Removing And Installing, Exhaust Side >> Removing

Balance Shaft, Removing And Installing, Exhaust Side: Removing

WARNING: This page is about a different car, the 2024 Audi Q5 e, 2024 Audi Q5, 2023 Audi Q5 e, and 2023 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -1- and the exhaust side balance shaft.

Fig 1: Identifying Intake Camshaft Balance Shaft
GWWA15-10467Courtesy of AUDI
scientia non olet · About LEMON Manuals