Crankshaft, Measuring Axial Clearance
WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Dial Indicator Holder:VW387
- Dial Indicator - 0-10mm:VAS6079
Procedure
Fig 3: Attaching Dial Indicator VAS 6079 Together With Dial Gauge Holder VW 387 To Cylinder Block And Setting Indicator Against Crankshaft Counterweight
-- Secure the Dial Gauge - 0-10mm:VAS6079 with the Dial Gauge Holder:VW387 on the cylinder block.
-- Place the dial gauge against the crankshaft counterweight.
-- Press the crankshaft against the dial gauge by hand and set the dial gauge to "0".
-- Press the crankshaft off the dial gauge and read the measurement.
- Axial play: 0.013 to 0.251 mm.