Overview - Balance Shaft
WARNING: This page is about a different car, the 2024 Audi SQ5 and 2023 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 40 Nm +45°
- Replace after removing
- Gear
- With the chain sprocket for the camshaft timing chain
- Bolt
- 9 Nm
- Balance Shaft
- Removing and Installing. Refer to BALANCE SHAFT, REMOVING AND INSTALLING .
- Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
- Balance Weight
- Can only be placed on the balance shaft in one position
- Bolt
- 40 Nm +90°
- Replace after removing
- Roller Bearing
- Replacing. Refer to ROLLER BEARING, REPLACING .
- Thrust Washer
- Seal
- Replace after removing
- Gear Carrier