Air Duct Pipe, Removing And Installing, With Radiator Installed 2.9L Engine: Installing

Install in reverse order of removal and note the following:

• Replacing the seals after removal.
• Check the O-ring of the crankcase ventilation for damage. Refer to CRANKCASE VENTILATION .
• Replace the bolts that were tightened with an additional turn after removing them.
• Secure all hose connections with hose clamps that match the ones used in series production.

-- Install the oil filter element. Refer to ENGINE OIL FILTER, REPLACING

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .