Part III

Part I. Refer to Part I .

Part II. Refer to Part II .

Fig 1: Exploded View Of Turbocharger, 3.0L Engine

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 9 Nm
2. Bracket
   • For the vacuum diaphragm
3. Turbocharger
   • Removing and Installing. Refer to TURBOCHARGER, REMOVING AND INSTALLING, 3.0L ENGINE .
4. Nut
   • 9 Nm
5. Locking Spring
   • Replace after removing.
6. Ball Socket
7. Nut
   • 8 Nm
8. Threaded Piece
9. Nut
   • 8 Nm
10. Vacuum Diaphragm
    • For the turbocharger
    • Repair set. Refer to the Parts Information
    • Removing and Installing. Refer to TURBOCHARGER VACUUM DIAPHRAGM, REPLACING .

Engine Cover Temperature Sensor G765 - Tightening Specification 

Fig 2: Engine Cover Temperature Sensor G765

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt -1- to 9 Nm.