LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Engine Support, Removing And Installing >> Right Engine Support, Removing And Installing >> Removing

Right Engine Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the right engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the nut -2- and free up the bracket with the wire.

GWWA10-12032Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the right engine support -1-. (Shown with the engine removed.)