LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Crankshaft, Cylinder Block (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 13 Crankshaft, Cylinder Block >> Crankshaft >> Crankshaft Dimensions

Crankshaft Dimensions

WARNING: This page is about a different car, the 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Reconditioning Dimension (1) Crankshaft Bearing Pin Diameter in mm Connecting Rod Bearing Pin Diameter in mm
Standard dimension 48.00 -0.032 -0.052 47.80 -0.022 -0.042
(1) The preparation of worn crankshafts is not possible at this time.
scientia non olet · About LEMON Manuals