LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> S4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Turbocharger, Supercharger (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4))) >> 21 Turbocharger, Supercharger >> Turbocharger >> Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING >> Installing

Charge Air Pressure Control Module -GX34-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Press the control rod onto the ball pin until it engages audibly.

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

After removing, installing or replacing the Charge Air Pressure Control Module -GX34-, adaptations must be performed. Refer to PERFORM ADAPTATIONS AFTER COMPONENT REPLACEMENT .

scientia non olet · About LEMON Manuals