Charge Air Cooler, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

If there are small impressions on the slats. Refer to RADIATOR AND CONDENSER ASSEMBLY .
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Install the lock carrier cover, right and left air intake grille as well as the bumper cover end plate. Refer to OVERVIEW - BUMPER COVER .