Upper Air Duct Pipe, Removing And Installing, 3.0L Engine: Installing

Install in reverse order of removal and note the following:

• Replace the seals and O-ring after removal.
• Check the O-ring of the crankcase ventilation for damage. Refer to OVERVIEW - CRANKCASE VENTILATION .
• Replace the bolts that were tightened with an additional turn after removing them.

-- Install the Throttle Valve Control Module -GX3-. Refer to Throttle Valve Control Module -GX3-, REMOVING AND INSTALLING .

-- Install the lock carrier cover. Refer to Front Bumper .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .