Overview - Bench Seat/Single Seats

WARNING: This page is about a different car, the 2024 Audi SQ8, 2024 Audi Q8, 2023 Audi SQ8, and 2023 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI

Bench Seat
- One piece
- Removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
Guide
- For the child seat anchor
- Quantity: 4
- Removing and Installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
Cover
- For the child seat anchor
- Quantity: 4
- Removing and Installing. Refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
Bench Seat
- 1/3 unit
- Removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
Cap
- Inner seat rail
- Unclip forward
Retainers
- For securing bench seat
- Equipment version: one-piece version: quantity 3, multi-piece version: quantity 4
- Clipped into the seat frame, to remove release the catches from below
- Always replace after removing the bench seat
Cap
- Out seat rail
- Unclip forward
Bolt
- Quantity: 8
- 50 Nm
Handle
- For the folding backrest handle
Expanding Clip
- Quantity: 9
Seat Frame
- For 1/3 unit
- Removing and installing. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
Trim Panel
- Outer seat frame
- Removing and installing. Refer to OUTER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Cover
- For outer seat frame trim panel
- Removing and installing. Refer to OUTER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Bolt
- Quantity: 4
- Self-locking
- Always replace after removing
- 85 Nm
Rear Seat Backrest
- 1/3 unit
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Seat Belt Latch Trim
- For inner seat frame trim panel
- Removing and installing. Refer to INNER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Trim Panel
- Inner seat frame
- Removing and installing. Refer to INNER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Cover
- For inner seat frame trim panel
- Removing and installing. Refer to INNER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Backrest with Pass-Through
- Overview. Refer to OVERVIEW - BACKREST WITH PASS-THROUGH .
Bolt
- Quantity: 2
- 25 Nm
Bolt
- Quantity: 4
- Self-locking
- Always replace after removing
- M14 X 16: 126 Nm
- M12 X 18: 79 Nm
Rear Seat Backrest
- 2/3 unit
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .
Trim Panel
- Center seat frame
- Removing and installing. Refer to CENTER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Cover
- For seat frame trim panel
- Removing and installing. Refer to CENTER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Cover
- For outer seat frame trim panel
- Removing and installing. Refer to OUTER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Trim Panel
- Outer seat frame
- Removing and installing. Refer to OUTER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Handle
- For the folding backrest handle
Mount
- For the seat frame
- Removing and installing. Refer to SEAT FRAME MOUNT, REMOVING AND INSTALLING .
Bolt
- Quantity: 15
- Note the different bolt versions
- 50 Nm
Seat Frame
- For 2/3 unit
- Removing and installing. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
Bench Seat
- 2/3 unit
- Removing and installing. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, REAR BENCH SEAT .
Cover
- For inner seat frame trim panel
- Removing and installing. Refer to INNER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .
Trim Panel
- Inner seat frame
- Removing and installing. Refer to INNER SEAT FRAME TRIM PANEL, REMOVING AND INSTALLING .