Potential Equalization Measurement
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
After installing the high-voltage components or potential equalization cables on the applicable high-voltage components a potential equalization measurement must be performed.
-- Connect the Vehicle Diagnostic Tester.
-- Select the ODIS service and start.
-- Select the tab special functions .
-- Select one after the other:
- High Voltage
- Potential Equalization Measurement
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.