Three-Point Rear Shoulder Belt

-- Remove rear seat cushion/backrest and rear filler panel. Refer to REAR SEAT CUSHION .

Courtesy of AUDI OF AMERICA, LLC

1. Belt Guide Cover
   • Large symbol must always point toward center of vehicle.
2. Webbing Guide Cover
   • Pry off with flat screwdriver.
3. Webbing Guide
   • To remove, press in retaining lug item  4 with flat screwdriver, pry off webbing guide upward.
4. Retaining Tab
   • Must engage completely.
5. Rear Filler Panel
   • Removing, refer to REAR FILLER PANEL .
6. Three-Point Seat Belt

   Removing  :

   -- Release webbing end from floor group.

   -- Lever off covers item  1 and item  2.

   -- Unscrew bolt item  7.

   -- Pull webbing through webbing guide.

   Installing  :

   -- Install in reverse order of removal.

7. Bolt
   • Unscrew in trunk.
   • 50 Nm (37 ft lb)