LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> RS 6 Avant >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Passenger Protection, Airbags, Seat Belts (General Information - Removal & Installation) >> 69 Passenger Protection, Airbags, Seat Belts >> Description And Operation >> Airbag II, My 1993 >> Passenger Side Airbag Assembly Overview

Passenger Side Airbag Assembly Overview

CAUTION:
  • Airbag power supply connector and battery ground strap must always be disconnected before working on the airbag or related systems.
  • Connector remains connected when using scan tool:VAG1551  .
  • Always obtain the correct radio security code before disconnecting the battery ground strap.
NOTE:

The glove compartment must be removed for access to the passenger side airbag unit. Refer to GLOVE COMPARTMENT .

GWWV96-1217Courtesy of AUDI OF AMERICA, LLC
  1. Retaining Bracket
  2. Bolts
    • 6.0 Nm (53 in lb)
  3. Passenger Side Airbag Unit
    • Place so horn pad faces up.
    • Pry off bracket, refer to Removing Locking Bracket .
    • Disconnect electrical connectors from airbag unit.
  4. Bolts
    • 6.0 Nm (53 in lb)
  5. Mounting Bolt
    • 15 Nm (11 ft lb)
  6. Support Bracket
  7. Mounting Bracket
  8. Bolt
    • 15 Nm (11 ft lb)
scientia non olet · About LEMON Manuals