Bumper Cover Mount, Removing And Installing, Bottom: Removing

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

A6:

Fig 1: A6 Component Location - Garage Door Opener Control Module

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the spring nut -arrow-.

-- Disengage and remove the bracket -1- for the garage door opener control module.

Equipment versions without trailer hitch:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-.

-- Remove the bumper cover mount -1-.

Equipment versions with trailer hitch:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows-.

-- Remove the bumper cover mount -1-.