Overview - Bumper Cover, A6

Fig 1: Overview - Bumper Cover, A6

Courtesy of AUDI OF AMERICA, LLC

Radiator Grille
- Overview. Refer to OVERVIEW - RADIATOR GRILLE .
End Panel
- The bumper cover
- Removing and Installing. Refer to BUMPER COVER END PANEL, REMOVING AND INSTALLING .
Bolt
- Quantity: 6
- 2 Nm
Towing Eye Cover
Bumper Cover
- Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
- Adjusting. Refer to BUMPER COVER, ADJUSTING .
Air Intake Grille
- Center
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A6 .
Bolt
- Quantity: 8
- 2 Nm
Lock Carrier Cover
- Removing and Installing. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
Expanding Rivet
Bolt
- Quantity: 3
- 5 Nm
Bolt
- Quantity: 2
- 2 Nm
End Panel
- Center
- Removing and Installing. Refer to CENTER END PANEL, REMOVING AND INSTALLING, A6 .
Bolt
- On radiator grille; quantity: 11, 2 Nm
- On bumper cover; quantity: 4, 1.5 Nm
Deformation Element
- Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A6 .
Bumper Cover Mount
- Removing and Installing. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Nut
- Quantity: 2
- 4 Nm
Bolt
- Only on the left side
- 2 Nm
Bracket
- For central connector
- Only on the left side on versions without radar sensor
Bolt
- Quantity: 4
- Inner screw: 1.5 Nm
- Outer screw: 2 Nm
Cover
- For the side air duct
- Removing and Installing. Refer to SIDE AIR DUCT, REMOVING AND INSTALLING, A6 .
Air Duct
- Side
- Removing and Installing. Refer to SIDE AIR DUCT, REMOVING AND INSTALLING, A6 .
Bolt
- 2 Nm
Cover
- For the headlamp washer system
- Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
Air Intake Grille
- Side
- Removing and Installing. Refer to SIDE AIR INTAKE GRILLE, REMOVING AND INSTALLING, A6 .
Trim
- For the side air intake grille
Bolt
- Quantity: 7
- 5 Nm
Front Spoiler
- Removing and Installing. Refer to FRONT SPOILER, REMOVING AND INSTALLING, A6 AND A7 SPORTBACK .