LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> RS 6 Avant >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers (4A2 & 4A5) >> 63 Bumpers >> Front Bumper >> Molded Foam Part, Removing And Installing >> Installing

Molded Foam Part, Removing And Installing: Installing

Install in reverse order of removal and note the following:

-- Install the pressure hose sensor for front pedestrian protection. Refer to PRESSURE HOSE SENSOR FOR FRONT PEDESTRIAN PROTECTION -G579-, REMOVING AND INSTALLING .