LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2021 >> RS 6 Avant >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers (4A2 & 4A5) >> 63 Bumpers >> Front Bumper >> Center Air Intake Grille, Removing And Installing >> Center Air Intake Grille, Removing And Installing, A6 S Line, S6 >> Removing

Center Air Intake Grille, Removing And Installing, A6 S Line, S6: Removing

-- Remove the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the bumper cover end plate. Refer to BUMPER COVER END PANEL, REMOVING AND INSTALLING .

-- Free up the wiring harness -3-.

GWWA63-11567Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Release the catches -1 and 4-.

-- Remove the air intake grille -2-.

Version 1:

GWWA63-11673Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness -3-.

-- Pry out the clamps -1-.

-- Release the catches -arrows-.

-- Remove the deformation element -2-.

Version 2:

Fig 1: Tightening specifications - deformation element, market-specific version
GWWA63-11672Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1-.

-- Release the catches -arrows-.

-- Remove the deformation element -2-.