Turbocharger, Removing And Installing, Cylinder Bank 2 (Left) 2.9L Engine: Removing

-- Remove the upper air duct pipe (refer to Air Duct Pipe, Removing And Installing ) and pivot to the left side.

-- Remove the Engine Control Module -J623-. Refer to Engine Control Module -J623-, REMOVING AND INSTALLING .

-- Free up the connector -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Free up the coolant line -3- and wiring harness.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the engine control module bracket -1-.

All additional procedures are described under: Turbocharger, Removing And Installing .