Lower Pressure Pipe, Removing And Installing: Removing
-- Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS - Engine .
-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
-- Remove the upper air duct -1- by releasing the upper catches in direction of -arrows- on the left and right side with the :T10118 (shown on the removed radiator).
-- Remove the front noise insulation. Refer to NOISE INSULATION .
-- Remove the charge air hoses from the right -item ) BODY-SIDE CHARGE AIR SYSTEM - Pressure Hose and left -item ) BODY-SIDE CHARGE AIR SYSTEM - Pressure Hose charge air cooler on the lower pressure pipe.
-- Remove the bolts -item ) BODY-SIDE CHARGE AIR SYSTEM - Bolt and remove the lower pressure pipe.