Lower Pressure Pipe, Removing And Installing: Removing
-- Pay attention to the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the lock carrier cover. Refer to the appropriate service information .
-- Remove the upper air duct -1- by releasing the upper catches in direction of -arrows- on the left and right side with the :T10118 (shown on the removed radiator).
-- Remove the front noise insulation. Refer to the appropriate service information .
-- Remove the charge air hoses from the right -item 26- and left -item 18- charge air cooler on the lower pressure pipe.
-- Remove the bolts -item 19- and remove the lower pressure pipe.