Section 238 (General, Technical Data (4-Cylinder Direct Injection 2.0L 4V TFSI Engine (Ea 888EVO4)))
WARNING: This page is about a different car, the 2024 Audi Q7 and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- 00 General, Technical Data
- Identification
- Safety Precautions
- Safety Precautions When Working On The High-Voltage System
- Safety Precautions When Working Near High-Voltage Components
- Safety Precautions When Working On Fuel Supply System
- Safety Precautions When Working On Vehicles With Start/Stop System
- Safety Precautions During Road Test With Testing Equipment
- Safety Precautions When Working On Cooling System
- Safety Precautions When Working On Exhaust System
- Safety Precautions When Working On Ignition System
- Repair Information
- Guidelines For Clean Working Conditions
- Clean Working Conditions When Working On High-Voltage Battery
- Perform Adaptations After Component Replacement
- Foreign Objects In Engine
- Engine, Cleaning
- Contact Corrosion
- Line Routing And Securing
- Radiator And Condenser Assembly
- Vacuum System, Checking
- Bolts And Nuts
- Identification Plates
- Impact Wrench, Using
- Procedures On High-Voltage Components Or Potential Equalization Cables
- Paint Work, Vehicles With High-Voltage System
- High-Voltage System Danger Classification