Coolant Pump Toothed Belt, Removing And Installing: Installing

Install in reverse order of removal and note the following:

• Replace the bolts that were tightened with an additional turn after removing them.
• Note the toothed belt sprocket installation location -item  ) Toothed Belt Sprocket.

-- Install the Oil Pressure Switch, Level 3 -F447-. Refer to Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .

-- If removed, install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .