Overview - Rear Lid, Security: Notes

Only differences from the standard production are described.

Courtesy of AUDI OF AMERICA, LLC

1. Rear Lid
   • Prepare the new rear lid after painting. Refer to Preparing the New Rear Lid after Painting: .
   • Removing and Installing. Refer to REAR LID, REMOVING AND INSTALLING, SECURITY .
2. Protecting Plate
   • Rear Lid
3. Protecting Plate
   • Nut: quantity 2, 28 Nm
   • Cable cover
   • Top right
4. Protecting Plate
   • Nut: quantity 3, 28 Nm
   • Cover
   • Top center
5. Protecting Plate
   • Nut: quantity 2, 28 Nm
   • Cable cover
   • Top left
6. Protecting Plate
   • Nut: quantity 4, 28 Nm
   • Windshield wiper motor cover
   • Tightening Specifications: 
7. Protecting Plate
   • Nut: quantity 2, 28 Nm
   • Tail Lamp Cover
   • Left
8. Protecting Plate
   • Nut: quantity 3, 28 Nm
   • Closing assist cover
   • Rear Lid Closing Assist Motor -V382-, Removing and Installing. Refer to Rear Lid Closing Assist Motor -V382-, REMOVING AND INSTALLING, SECURITY .
   • Closing Assist Release Cable, Removing and Installing. Refer to CLOSING ASSIST RELEASE CABLE, REMOVING AND INSTALLING, SECURITY .
9. Protecting Plate
   • Nut: quantity 2, 28 Nm
   • Latch cover
   • Latch, Removing and Installing. Refer to LATCH, REMOVING AND INSTALLING, SECURITY .
10. Protecting Plate
    • Nut: quantity 2, 28 Nm
    • Tail Lamp Cover
    • Right