Latch Release Cable, Removing And Installing: Installing
Install in reverse order of removal and note the following:
-- Engage the release cable nipple -3- into the coupling roller -2- and push the release cable into the support bracket.
-- Position the housing cover -1- so that the printed arrow points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.
Install in reverse order of removal and note the following:
-- Engage the release cable nipple -3- into the coupling roller -2- and push the release cable into the support bracket.
-- Position the housing cover -1- so that the printed arrow points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.