Diagonal Braces, Removing And Installing: Removing
-- Remove the left and right underbody trim panel. Refer to UNDERBODY TRIM PANEL, REMOVING AND INSTALLING, SIDE .
-- Support the subframe using the :VAS6931 and :T10337 .
CAUTION:
Risk of damaging the thread by using an impact wrench.
- When installing, position the bolts by hand and screw in the first threads.
- Do not loosen or tighten the bolts with an impact wrench.
-- Remove the bolts -1 to 5- and the diagonal brace.
-- Re-install the bolts -2 and 4- all the way.